[Metricon](/builders/metricon) is Australia's largest home builder, with a 50-year track record and multiple HIA Professional Major Builder of the Year awards. They deliver thousands of homes across Queensland every year — across Logan, [Ipswich](/ipswich), Moreton Bay, Brisbane North and South, and the Redlands.
This guide explains what an independent QBCC-licensed inspector looks at on any volume builder PCI. The same checklist applies whether you're building with [Metricon](/builders/metricon) or any other major builder. The purpose is to help you understand what an independent inspection covers — not to suggest that every Metricon home will have these items.
Why Independent Inspection Matters on Any New Build
The Queensland construction market is operating under sustained supply-chain and skilled-labour pressure. Material lead times remain longer than pre-2021 norms, subcontractor crews are stretched across many concurrent sites, and stage completion schedules are tight. These industry-wide realities are why independent inspections have become standard practice across Australia — they give homeowners a calm, structured second look before settlement.
What an Independent Inspector Looks At on Your PCI
### 1. Wet Areas Wet areas are the highest-risk and highest-value focus on any volume builder PCI. We measure membrane heights against the 1800mm minimum, check coverage at floor-to-wall junctions, and verify sealant continuity at bath wastes and floor wastes.
Why it matters: wet area issues are the single most expensive items to remediate after handover, so catching them now is the highest-value part of any inspection.
### 2. Contract Specification Items At handover we walk through your full contract schedule — landscaping, fencing, driveway sealing, appliances, tapware and tile selections — and flag anything outstanding. These are contractual obligations that belong on your defects list before you sign.
### 3. Window and Door Frame Sealing Gaps and incomplete sealing at external frames matter in SEQ's storm-prone climate. We check every external frame junction.
### 4. Cornice and Plasterboard Cornice junctions and plasterboard surface variation are checked against the QBCC Standards and Tolerances guide. Documenting items above the threshold gives you straightforward leverage.
### 5. Site Drainage Site drainage must direct stormwater away from the building. On sloped or filled lots — common in [Ipswich](/ipswich) and Logan — falls are checked and measured against the required 50mm over the first metre.
### 6. Paintwork Touch-up paint and finish quality is assessed under the QBCC lighting test. Items above tolerance are documented.
### 7. Frame Stage (if booked) Where a frame inspection is booked, the engineer's bracing schedule, tiedown placement and roof truss lateral bracing are checked before plasterboard goes on. Moreton Bay and Sunshine Coast wind regions make this stage particularly worthwhile.
Should I Get an Independent Inspection on a Metricon Home?
Yes — and the same answer applies to any new home with any builder. Metricon runs strong internal quality processes and their site supervisors are generally engaged. An independent inspector simply adds a second, fully independent layer that works only for you. A typical SEQ inspection identifies 15–30 documented items per new home regardless of builder — most are straightforward rectifications that the builder addresses before settlement.
Ready to book your inspection? A VG Inspect QBCC-licensed inspector attends every job.
Book an InspectionWhere Metricon Builds in SEQ — Book an Inspection
VG Inspect inspects Metricon homes across all South East Queensland regions — Logan, Ipswich, Moreton Bay, Brisbane North and South, and the Redlands.
Same-week availability · From $660 · PDF report within 24 hours · 5.0 ★ on Google · QBCC Lic. 1318443
[Book your Metricon inspection →](https://vginspect.com/book)
— Adam Gates, QBCC Lic. 1318443
Metricon builds good homes. An independent inspection gives you confidence and protects your investment before handover.
