Frame Inspections in Brisbane
The frame inspection happens once the timber or steel frame and roof trusses are standing, but before any plaster or lining hides them. For Brisbane new builds across suburbs such as Everton Park, Aspley and the bayside pockets of Manly West, our builder-inspectors check bracing, tie-down and hold-down connections, stud, plate and lintel sizes and the straightness and plumb of the walls against AS 1684 and the engineer drawings. We also look over truss layout, fixing and any site modifications. Because the frame carries wind and roof loads back to the slab, getting bracing and tie-downs right matters, and it is far easier to correct a missing strap or brace now than after the plasterboard is on and the house is lined.
Book an InspectionFrame Inspection from $550 · Same-day digital report · QBCC Licence 1318443 · Call 07 3180 8041
Why a frame inspection matters in Brisbane
Frame is the stage most owners get inspected, for good reason: bracing, tie-downs and straightness are cheap to correct before plaster and expensive — sometimes impossible — after the linings go on.
At Brisbane frame stage we regularly check wall bracing quantity and fixing, tie-down and hold-down straps and bolts to AS 1684, stud, plate and lintel sizing, wall plumb and straightness, and truss fixing and layout. We also note any trimming or notching of structural members and whether site changes still match the engineer and truss documentation.
Local conditions in Brisbane
Brisbane's new-build activity runs from the northern suburbs — Aspley, Bracken Ridge, Carseldine and the Fitzgibbon priority development area — out to the bayside east around Wynnum and Manly West. Much of it sits on reactive clay and some on filled or sloping lots, which makes the early slab and frame stages worth getting right. Our builder-inspectors cover the whole metro area and send a same-day photo report referenced to the NCC, the relevant Australian Standards and the QBCC Standards and Tolerances Guide.
What we check at the frame stage
With the frame up and before plaster, we check the structure you'll never see again (AS 1684):
Structure & bracing (AS 1684)
- Wall and roof bracing type, location and fixing
- Tie-downs / hold-downs through the load path
- Stud, plate and lintel sizes and spans
Straightness & openings
- Wall plumb, straightness and line
- Lintels and openings supported correctly
- Roof trusses, bracing and tie-down to the frame
Every item is photographed and referenced to the relevant Australian Standard, NCC clause or the QBCC Standards and Tolerances Guide, then delivered in a same-day digital report you can hand straight to your builder. See the full frame inspection details, or read how to choose a new-build inspector in Queensland.
Other inspection stages across Brisbane
Most owners book several stages so defects are caught before the next trade covers them. Alongside the frame inspection, we also inspect across Brisbane:
Suburbs we cover in Brisbane
We inspect new builds across the whole Brisbane City Council area, including:
Inspection pricing in Brisbane
Frame Inspection FAQs — Brisbane
When is the right time for a frame inspection in Brisbane?
After the frame and roof trusses are up and the roof is on, but before insulation and plaster go in, so every brace, strap and connection is still visible.
What are the most important things checked at frame stage?
Bracing, tie-downs and hold-downs, structural member sizes and wall plumb and straightness to AS 1684, plus truss fixing, are the core structural checks.
Do you check both timber and steel frames?
Yes. We inspect timber and light steel frames against the engineer drawings and the relevant standard, checking connections, bracing and straightness either way.
Your inspector
Your Brisbane inspection is carried out by a VG Inspect builder-inspector — a QBCC-licensed builder who inspects new builds full-time. Every VG Inspect inspector is a builder first and holds their own QBCC licence, and every report is checked before it's sent. You can verify any licence on the QBCC online licence search. VG Inspect holds a 5.0 rating across over 100 verified reviews and is fully insured.
Book your Brisbane frame inspection
Give us the date as early as you can — builders often give short notice. Same-day report.
Book an Inspection