Independent Stroud Homes Building Inspections — Moreton Bay & SEQ
Building with Stroud Homes? VG Inspect gives you an independent, QBCC-licensed inspection at each stage — a consistent benchmark for your home no matter which franchise office built it.
Book an InspectionFrom $660 (new homes under 220m²) — larger homes quoted on request · Same-week availability · Same-Day Digital Reports
Last updated: May 2026
Building with Stroud Homes? An independent set of eyes
Stroud Homes operates on a franchise model — each office is independently owned and run, which gives owners a strong local relationship and flexibility across a mid-tier range of single and double-storey, acreage and sloping-site designs. Across the northern Moreton Bay corridor that often means a mix of suburban builds and larger acreage or semi-rural lots, and Stroud is active around the North Harbour estate at Burpengary East [ADAM TO CONFIRM: Stroud Homes activity at North Harbour]. VG Inspect works alongside Stroud Homes owners as a fully independent inspector — never engaged or paid by the builder. We provide an additional, owner-focused set of QBCC-licensed eyes that complements the franchise's own quality control and the private certifier's compliance role, documenting every item against the National Construction Code (NCC Volume 2), the relevant Australian Standards and the QBCC Standards and Tolerances Guide.
What VG Inspect commonly checks on a Stroud Homes build
With Stroud's franchise flexibility and the acreage, sloping and split-level designs common across this corridor, we pay close attention to site-specific drainage, slab and footing design for the soil class, and consistency of finish. Stage by stage:
Pre-pour & slab stage
- Slab and footing design against the engineer's drawings and AS 2870 — important on acreage, sloping and reactive-soil lots where the design can vary across the block.
- Termite management per AS 3660.1 and correct set-down levels at wet areas.
- Drop-edge beams, piering or stepped footings on sloping sites confirmed against the engineer's detail.
- Site drainage, overland flow and finished levels on larger lots where stormwater has further to travel.
Frame stage
- Wall and roof framing, bracing, tie-downs and truss connections per AS 1684 and the engineer's design, including the wind classification under AS 4055 / AS 1170.2 for more exposed or acreage sites.
- Stud straightness, lintel sizing and service penetrations checked before linings.
- Any custom-plan or split-level structural details checked against the approved drawings.
Lock-up & cladding
- External cladding, brickwork or render, flashings, weep holes and sealants before the facade is finished.
- Window head and sill flashings and clean cavities behind the cladding.
- Roof covering, valleys, flashings and penetrations per NCC Volume 2 Part 3.5, plus any tank or rural plumbing connections where applicable.
Waterproofing & fixing
- Wet-area waterproofing to showers, bathrooms, laundry and any ensuite per AS 3740 before tiling — the highest-consequence defect category on any build.
- Plasterboard, cornice and trim set-out, plus cabinetry alignment and door/drawer operation.
- Tiling layout, lippage and grout against the relevant tolerances and the contract finishes.
PCI / handover
- Internal finishes against QBCC Section 14 tolerances, with particular attention to consistency of workmanship across a custom or acreage plan.
- Joinery, benchtops, fixtures, appliances and contract-specified inclusions installed as agreed.
- Site works, driveway, drainage and finished ground levels per NCC Volume 2 Part 3.1.2.3.
- Compliance documentation collated — Form 16s, Form 21, waterproofing and termite notices.
See how a handover inspection works on a new build — PCI / handover inspection.
Suburbs where we inspect Stroud Homes homes
VG Inspect carries out independent inspections alongside Stroud Homes owners right across the northern Moreton Bay growth corridor and the wider South East Queensland market. A few of the suburbs and estates we cover:
Not sure if we cover your estate or stage? Book online or call us — 07 3180 8041 — and we'll confirm before charging anything.
Why an independent inspection alongside Stroud Homes
Asking for an independent inspection is not about doubting your Stroud Homes franchise — it is about having someone in your corner whose only client is you. Because each franchise is independently run, an external, standards-based report gives you a consistent benchmark regardless of which office built your home. The private certifier checks regulatory compliance, not finish quality or your contract inclusions, and your builder's team is juggling several jobs at once. A VG Inspect report bridges that gap with photographed, clause-referenced items your supervisor can action efficiently. Most builders would rather rectify a flagged item before handover than have it resurface as a warranty claim — so a fair, professional report helps the whole project, which is exactly how we like to work across South East Queensland.
Inspection types for Stroud Homes builds
Stroud Homes inspection FAQs
Are you connected to my Stroud Homes franchise?
No. VG Inspect is independent of Stroud Homes and every franchise office — we are not paid or appointed by the builder. You are our only client, so our assessment is yours alone.
Each Stroud Homes office is different — does that matter for an inspection?
It is actually a good reason to have one. Because franchises are independently run, an external, standards-based report gives you a consistent benchmark no matter which office built your home — every item measured against the same NCC, Australian Standards and QBCC tolerances.
I'm building on acreage or a sloping block with Stroud — do you inspect those?
Yes. Acreage, sloping and split-level lots are common across this corridor, and they bring specific things to watch — footing and slab design for variable soil, drop-edge beams or piering, site drainage over a larger lot, wind classification, and any tank or rural plumbing. We factor all of that into the inspection.
Does Stroud Homes build at North Harbour?
Stroud is active around the North Harbour estate at Burpengary East [ADAM TO CONFIRM: Stroud Homes activity at North Harbour]. Wherever your build is, the inspection is carried out on your own block and is specific to your home and its lot.
When should I book my Stroud Homes handover inspection?
Book as soon as you receive the practical completion notice — typically 5 to 14 days before handover. Booking early protects your slot and leaves room for a re-inspection after any rectification.
Should I inspect earlier stages or just the handover?
The PCI / handover inspection is the most important single inspection. On acreage and sloping-site builds, adding a slab and a frame inspection is particularly worthwhile, because footing design and framing are difficult to assess once they are covered by the next trade.
What does a Stroud Homes inspection cost?
Handover (PCI) inspections are $660 for new homes under 220m², larger homes quoted on request. Stage and 11-month warranty inspections start from $550, with no travel surcharge across Moreton Bay and the northern corridor.
Where do you inspect Stroud Homes builds?
Throughout the northern Moreton Bay corridor and wider SEQ — including Caboolture, Morayfield, Narangba, Burpengary East and North Harbour, plus Burpengary, Bribie Island, Bahrs Scrub and Flagstone. Call us to confirm coverage for your specific lot.
Book your independent Stroud Homes inspection
Building with Stroud Homes? Have an independent, QBCC-licensed inspector (Licence 1318443) on your side before handover. Book online or call 07 3180 8041 — same-week availability across South East Queensland.
Book an Inspection