65 Google Reviews
    07 3180 8041
    Waterproofing Inspection · Warner

    Waterproofing Inspection in Warner

    Waterproofing is the highest-consequence defect category on any new home, and the waterproofing inspection in your Warner build is carried out after the wet-area membrane is applied but before tiling covers it forever. VG Inspect carries out an independent, QBCC-licensed waterproofing inspection across the Moreton Bay area, checking the membrane to showers, bathrooms, laundries and ensuites — coverage, upturns, falls to drainage and penetrations — against AS 3740 and NCC Volume 2 Part 3.8.1.1. You receive a same-day digital report with every item photographed and referenced. Because a failed membrane is sealed behind tiles and can leak silently for years, this is one inspection that is genuinely worth getting right before the tiler arrives at your Warner home.

    Book an Inspection

    Waterproofing Inspection from $550 · Same-day digital report · QBCC Licence 1318443 · Call 07 3180 8041

    Last updated: May 2026

    Waterproofing is the highest-consequence defect category on any new home. A failed membrane is sealed behind tiles and can leak silently for years — which is exactly why this stage is worth inspecting before the tiler arrives.

    Why a waterproofing inspection matters in Warner

    Of every defect documented on new homes, waterproofing failures are the most expensive and disruptive to fix — because by the time a leak shows, it is behind finished tiles, walls and sometimes flooring. In your Warner home, the waterproofing inspection is the only time the membrane is visible and verifiable: its coverage, the upturn heights at the shower and hob, the falls to the floor wastes and the detailing at penetrations and junctions. On a split-level or two-storey hillside design, an upper-floor wet area leaking into the rooms below is one of the costliest problems to put right. Confirming all of it against AS 3740 and NCC Volume 2 Part 3.8.1.1 before the tiler starts means the wet areas are protected from the outset, rather than becoming a warranty claim that involves stripping tiles to fix on a finished Warner home.

    Local conditions in Warner (4500)

    Warner's newer hillside homes often make the most of their elevated outlook with larger ensuites, multiple bathrooms and split-level layouts, which can mean more wet areas — and sometimes upper-storey ones — each needing its membrane, upturns and floor falls checked before tiling. On a split-level or two-storey design, an upper-floor wet area sits directly above habitable rooms, so a sound membrane is critical to keeping water from tracking down through the structure. With wet areas in any new home seeing heavy year-round use, an independent set of eyes on the waterproofing before the tiler covers it gives you certainty that the highest-risk part of your Warner build has been completed to AS 3740.

    On-site waterproofing photo · Warner
    Wet-area waterproofing membrane, upturns and floor falls in a Warner bathroom being checked against AS 3740 before tiling.

    What we check at the waterproofing stage

    Waterproofing is the single highest-consequence defect category on any new home. A failed wet-area membrane is hidden behind tiles and can leak silently for years, causing structural and health damage that is expensive to put right. The waterproofing inspection is carried out after the membrane is applied but before tiling covers it forever. Here is what we check against AS 3740 and NCC Volume 2 Part 3.8.1.1:

    Membrane application

    • Membrane applied to the correct extent across showers, bathrooms, laundries, ensuites and any balcony or upper-level wet areas per AS 3740.
    • Membrane coverage, thickness and continuity checked at floors, walls and the critical floor-to-wall junctions.
    • Bond breakers, reinforcing tape and corner detailing confirmed at all internal angles and movement joints.

    Upturns, falls & penetrations

    • Membrane upturn heights at shower walls, hobs and door thresholds confirmed against AS 3740.
    • Floor falls graded to the floor wastes so water drains rather than ponds, per NCC Volume 2 Part 3.8.1.1.
    • Penetrations for wastes, tap sets and floor drains sealed and dressed into the membrane.

    Substrate & compliance

    • Substrate condition, set-downs and primer confirmed suitable before the membrane was applied.
    • Wet-area junctions to adjoining floors and the door threshold detail checked to keep water contained.
    • Waterproofing certificate / documentation confirmed available for your records and the compliance pack.

    Every item is photographed and referenced to the relevant Australian Standard, NCC clause or the QBCC Standards and Tolerances Guide, then delivered in a same-day digital report you can hand straight to your builder. See the full construction stage inspection process, or the PCI / handover inspection for the final stage before you accept the keys.

    Other inspection stages in Warner

    Most owners book several stages across the build so defects are caught before the next trade covers them. Alongside the waterproofing inspection, we also inspect:

    Inspection pricing in Warner

    Construction stage inspection — from $550Pre-pour, slab, frame, enclosed (lock-up) and waterproofing inspections. Each is a focused stage check with a same-day digital report. No travel surcharge across Warner and the wider Moreton Bay Regional Council area.
    PCI / handover inspection — from $660Independent final inspection of new homes under 220m² before you accept the keys; larger homes are individually quoted. Our most-booked inspection.
    Warranty inspection (11-month) — from $550Booked near the 11-month mark to catch defects that emerge in the first year, before the 12-month statutory defect liability period closes.

    Waterproofing Inspection FAQs — Warner

    When is the waterproofing inspection done in a Warner build?

    After the wet-area waterproofing membrane has been applied and cured, but before any tiling starts. That is the only window in which the membrane is visible — once the tiles go on, it is sealed in and can no longer be inspected without removing them, so the timing on this one is critical.

    Why is waterproofing the highest-consequence stage?

    Because a failed membrane leaks silently behind finished tiles and walls, often for years, before the damage becomes visible — and rectifying it usually means stripping out tiles and linings. In a split-level Warner home an upper-floor leak can track into rooms below. Catching a coverage gap, low upturn or poor fall now, against AS 3740, avoids a far larger and more disruptive repair later.

    Which wet areas do you check in a Warner home?

    All of them — main bathroom, ensuite, laundry, any powder room and any upper-storey or balcony wet areas, which are common in Warner's split-level designs. We check membrane coverage and continuity, upturn heights, falls to the floor wastes per NCC Volume 2 Part 3.8.1.1, and the detailing at penetrations and floor-to-wall junctions.

    How much is a waterproofing inspection in Warner?

    Waterproofing inspections are from $550 with a same-day digital report and no travel surcharge across Warner and the Moreton Bay Regional Council area. Given it is the highest-consequence defect category, it is one of the most worthwhile stage inspections to book on any new home.

    Your inspector

    Every Warner inspection is carried out personally by Adam Gates, an independent QBCC-licensed building inspector (Licence 1318443). Nothing is subcontracted — the person who licences and signs your report is the person who stood on your site. You can verify the licence yourself on the QBCC online licence search before you book. VG Inspect holds a 5.0 rating across 65 verified reviews and is fully insured.

    Book your Warner waterproofing inspection

    Same-week availability · QBCC licensed · Same-day digital reports.

    Book an Inspection

    Call Adam on 07 3180 8041 — Waterproofing Inspection from $550.

    07 3180 8041