Frame Inspections in Logan
When the frame and roof trusses are up but the walls are not yet lined, the frame inspection gives a full view of the structure of your Logan home. From Browns Plains and Crestmead to Cornubia and the Yarrabilba estates, our builder-inspectors check wall bracing, tie-down and hold-down connections, stud, plate and lintel sizes and the plumb and straightness of the walls to AS 1684 and the engineer drawings. We review truss layout and fixing and note any cutting or trimming of structural members on site. The frame carries wind and roof loads down to the slab, so correct bracing and tie-downs matter, and a missing brace or strap is a quick fix at this stage and an expensive one once the plasterboard is on.
Book an InspectionFrame Inspection from $550 · Same-day digital report · QBCC Licence 1318443 · Call 07 3180 8041
Why a frame inspection matters in Logan
Frame is the stage most owners get inspected, for good reason: bracing, tie-downs and straightness are cheap to correct before plaster and expensive — sometimes impossible — after the linings go on.
At Logan frame stage we regularly check bracing quantity and fixing, tie-down and hold-down straps and bolts to AS 1684, stud, plate and lintel sizing, wall plumb and straightness, and truss layout and fixing. We also look at notching and trimming of structural members and whether site changes still match the engineer and truss documentation.
Local conditions in Logan
Logan's house-and-land growth stretches across Browns Plains, Crestmead, Beenleigh, Eagleby and the newer estates at Bahrs Scrub and Yarrabilba. A lot of it is reactive clay and cut-and-fill batter sites, so footing design, slab edge and frame bracing matter more here than on a flat sand pad. Our builder-inspectors work the stages where defects get covered up and send a clause-referenced photo report the same day.
What we check at the frame stage
With the frame up and before plaster, we check the structure you'll never see again (AS 1684):
Structure & bracing (AS 1684)
- Wall and roof bracing type, location and fixing
- Tie-downs / hold-downs through the load path
- Stud, plate and lintel sizes and spans
Straightness & openings
- Wall plumb, straightness and line
- Lintels and openings supported correctly
- Roof trusses, bracing and tie-down to the frame
Every item is photographed and referenced to the relevant Australian Standard, NCC clause or the QBCC Standards and Tolerances Guide, then delivered in a same-day digital report you can hand straight to your builder. See the full frame inspection details, or read how to choose a new-build inspector in Queensland.
Other inspection stages across Logan
Most owners book several stages so defects are caught before the next trade covers them. Alongside the frame inspection, we also inspect across Logan:
Suburbs we cover in Logan
We inspect new builds across the whole Logan City Council area, including:
Inspection pricing in Logan
Frame Inspection FAQs — Logan
When is the best time for a Logan frame inspection?
After the frame and trusses are up and the roof is on, but before insulation and plaster, so every brace, strap and connection can be seen.
What is covered at the frame stage?
Bracing, tie-downs and hold-downs, member sizing and wall plumb and straightness to AS 1684, plus truss fixing, form the core structural checks.
Do you attend frame inspections in Yarrabilba?
Yes. We inspect frames across Logan, including the newer Yarrabilba and Bahrs Scrub estates, on new-build homes.
Your inspector
Your Logan inspection is carried out by a VG Inspect builder-inspector — a QBCC-licensed builder who inspects new builds full-time. Every VG Inspect inspector is a builder first and holds their own QBCC licence, and every report is checked before it's sent. You can verify any licence on the QBCC online licence search. VG Inspect holds a 5.0 rating across over 100 verified reviews and is fully insured.
Book your Logan frame inspection
Give us the date as early as you can — builders often give short notice. Same-day report.
Book an Inspection