Over 100 five-star Google reviews
    07 3180 8041
    Pre-Plaster (Lock-Up) Inspection · Logan

    Pre-Plaster (Lock-Up) Inspections in Logan

    A pre-plaster or lock-up inspection in Logan is done after the plumbing and electrical rough-in and insulation are complete, but before the plasterboard goes up. From Eagleby and Beenleigh to Crestmead and the newer estates, our builder-inspectors review the rough-in services, insulation, noggings and fixing points, and the installation and flashing of windows and external doors, plus sarking and wall wrap where exposed. All of this disappears behind the linings, so this is the last clear opportunity to confirm services and flashings are correct. Picking up a missing nogging, an unflashed window or a gap in the wrap now is straightforward, whereas finding it after the house is lined and painted means opening walls back up, which is costly and slow.

    Book an Inspection

    Pre-Plaster (Lock-Up) Inspection from $550 · Same-day digital report · QBCC Licence 1318443 · Call 07 3180 8041

    Why a pre-plaster (lock-up) inspection matters in Logan

    Pre-plaster (lock-up) is your last look before the wall and ceiling linings hide the services, insulation and flashings — the things that cause the most expensive callbacks once they're covered.

    Common Logan pre-plaster items include window and external door flashing and installation, sarking and wall-wrap laps, insulation coverage, noggings and fixing backing for fittings, and tidy plumbing and electrical rough-in. We check flashing at window heads and sills and confirm that wet-area and external penetrations are properly sealed before linings go on.

    Local conditions in Logan

    Logan's house-and-land growth stretches across Browns Plains, Crestmead, Beenleigh, Eagleby and the newer estates at Bahrs Scrub and Yarrabilba. A lot of it is reactive clay and cut-and-fill batter sites, so footing design, slab edge and frame bracing matter more here than on a flat sand pad. Our builder-inspectors work the stages where defects get covered up and send a clause-referenced photo report the same day.

    What we check at the pre-plaster stage

    At lock-up, after rough-in and before the linings close everything in, we check:

    Services rough-in

    • Plumbing and electrical rough-in positions and support
    • Insulation installation and coverage
    • Noggings/backing for fixtures and heavy items

    Weather & frame

    • Window and external door installation and flashing
    • Sarking/wrap and external weatherproofing prep
    • Frame completion and any outstanding frame-stage items

    Every item is photographed and referenced to the relevant Australian Standard, NCC clause or the QBCC Standards and Tolerances Guide, then delivered in a same-day digital report you can hand straight to your builder. See the full pre-plaster (lock-up) inspection details, or read how to choose a new-build inspector in Queensland.

    Other inspection stages across Logan

    Most owners book several stages so defects are caught before the next trade covers them. Alongside the pre-plaster (lock-up) inspection, we also inspect across Logan:

    Inspection pricing in Logan

    Construction stage inspection — from $550Pre-pour, slab, frame, pre-plaster (lock-up) and waterproofing inspections. Each is a focused stage check with a same-day digital report across Logan and the wider Logan City Council area.
    Handover / PCI inspection — from $660Independent final inspection of new homes under 220m² before you accept the keys; larger homes are individually quoted. Our most-booked inspection.

    Pre-Plaster (Lock-Up) Inspection FAQs — Logan

    What does a pre-plaster inspection involve in Logan?

    We check the plumbing and electrical rough-in, insulation, noggings and window and door flashing while they are visible, before the plasterboard is fixed.

    Why inspect before the linings go on?

    Once the sheets are up, services and flashings are hidden. Finding a problem now avoids cutting open finished, painted walls later in the build.

    Do you check insulation at this stage?

    Yes. We confirm insulation is in place and to the right coverage, along with noggings, rough-in services and window and door flashing.

    Your inspector

    Your Logan inspection is carried out by a VG Inspect builder-inspector — a QBCC-licensed builder who inspects new builds full-time. Every VG Inspect inspector is a builder first and holds their own QBCC licence, and every report is checked before it's sent. You can verify any licence on the QBCC online licence search. VG Inspect holds a 5.0 rating across over 100 verified reviews and is fully insured.

    Book your Logan pre-plaster (lock-up) inspection

    Give us the date as early as you can — builders often give short notice. Same-day report.

    Book an Inspection
    07 3180 8041
    Call Book