Over 100 five-star Google reviews
    07 3180 8041
    Frame Inspection · Moreton Bay

    Frame Inspections in Moreton Bay

    Once the frame and roof trusses are standing but before plaster goes on, the frame inspection gives you a clear view of the structure of your Moreton Bay home. From Albany Creek and Bray Park to the newer estates at Narangba and Caboolture West, our builder-inspectors check wall bracing, tie-down and hold-down connections, stud, plate and lintel sizes and the plumb and straightness of the walls to AS 1684 and the engineer drawings. We review truss layout and fixing and any on-site modifications to structural members. The frame transfers wind and roof loads down to the slab, so correct bracing and tie-downs are critical, and a missing strap or under-sized member is simple to fix now and a major job once the house is lined.

    Book an Inspection

    Frame Inspection from $550 · Same-day digital report · QBCC Licence 1318443 · Call 07 3180 8041

    Why a frame inspection matters in Moreton Bay

    Frame is the stage most owners get inspected, for good reason: bracing, tie-downs and straightness are cheap to correct before plaster and expensive — sometimes impossible — after the linings go on.

    At Moreton Bay frame stage we regularly check bracing type, quantity and fixing, tie-down and hold-down straps and bolts to AS 1684, stud, plate and lintel sizing, wall plumb and straightness, and truss layout and fixing. We also note notching or trimming of structural timbers and whether changes on site still match the engineer and truss plans.

    Local conditions in Moreton Bay

    Moreton Bay is one of the busiest new-home corridors in South East Queensland — Caboolture West, Burpengary, Narangba, North Lakes and the growth estates around Albany Creek and Bray Park. Many of these estates are on filled or reactive sites where the pre-pour and slab stages carry the most risk, and coastal pockets near Beachmere add a waterproofing and durability angle. Every inspector is a licensed builder, and the report lands the same day so your supervisor can act before the next trade starts.

    What we check at the frame stage

    With the frame up and before plaster, we check the structure you'll never see again (AS 1684):

    Structure & bracing (AS 1684)

    • Wall and roof bracing type, location and fixing
    • Tie-downs / hold-downs through the load path
    • Stud, plate and lintel sizes and spans

    Straightness & openings

    • Wall plumb, straightness and line
    • Lintels and openings supported correctly
    • Roof trusses, bracing and tie-down to the frame

    Every item is photographed and referenced to the relevant Australian Standard, NCC clause or the QBCC Standards and Tolerances Guide, then delivered in a same-day digital report you can hand straight to your builder. See the full frame inspection details, or read how to choose a new-build inspector in Queensland.

    Other inspection stages across Moreton Bay

    Most owners book several stages so defects are caught before the next trade covers them. Alongside the frame inspection, we also inspect across Moreton Bay:

    Inspection pricing in Moreton Bay

    Construction stage inspection — from $550Pre-pour, slab, frame, pre-plaster (lock-up) and waterproofing inspections. Each is a focused stage check with a same-day digital report across Moreton Bay and the wider City of Moreton Bay area.
    Handover / PCI inspection — from $660Independent final inspection of new homes under 220m² before you accept the keys; larger homes are individually quoted. Our most-booked inspection.

    Frame Inspection FAQs — Moreton Bay

    When should a frame inspection be done in Moreton Bay?

    After the frame and trusses are up and the roof is on, but before insulation and plaster, so bracing, straps and connections are all still visible.

    What does the frame stage cover?

    Bracing, tie-downs and hold-downs, member sizing and wall plumb and straightness to AS 1684, plus truss fixing, are the main structural checks.

    Do you inspect frames in the new Caboolture West estates?

    Yes. We attend frame inspections across the Moreton Bay corridor, including Caboolture West, Narangba and Burpengary, on new-build homes.

    Your inspector

    Your Moreton Bay inspection is carried out by a VG Inspect builder-inspector — a QBCC-licensed builder who inspects new builds full-time. Every VG Inspect inspector is a builder first and holds their own QBCC licence, and every report is checked before it's sent. You can verify any licence on the QBCC online licence search. VG Inspect holds a 5.0 rating across over 100 verified reviews and is fully insured.

    Book your Moreton Bay frame inspection

    Give us the date as early as you can — builders often give short notice. Same-day report.

    Book an Inspection
    07 3180 8041
    Call Book