Over 100 five-star Google reviews
    07 3180 8041
    Slab Inspection · Moreton Bay

    Slab Inspections in Moreton Bay

    After the slab has cured and before the frame is delivered, a Moreton Bay slab inspection confirms the concrete was poured to the design. Across the corridor from Burpengary and Narangba to coastal Beachmere, our builder-inspectors measure the slab for size, square and level, and check the edge rebates and step-downs for wet areas, the garage and any alfresco. We review the surface for cracking, honeycombing and cold joints, and confirm the brick ledge overhang is within tolerance. On the filled estates that dominate this region, early movement or shrinkage can show in the slab, so an independent check now, with the slab still clear of the frame, means any dimensional or finish problem is dealt with before it affects wall framing and later waterproofing.

    Book an Inspection

    Slab Inspection from $550 · Same-day digital report · QBCC Licence 1318443 · Call 07 3180 8041

    Why a slab inspection matters in Moreton Bay

    A slab-stage check confirms the pour matched the pre-pour inspection and gives you a documented baseline — set-out errors and edge/step-down problems are far cheaper to raise now than after the frame is standing.

    Common Moreton Bay slab items include surface cracking, honeycombing and cold joints, correct wet-area and garage set-downs, overall dimensions, square and level, and brick overhang around 15mm. On filled estates near Caboolture West and Narangba we note early shrinkage cracking and whether set-downs leave adequate fall for later wet-area and balcony waterproofing.

    Local conditions in Moreton Bay

    Moreton Bay is one of the busiest new-home corridors in South East Queensland — Caboolture West, Burpengary, Narangba, North Lakes and the growth estates around Albany Creek and Bray Park. Many of these estates are on filled or reactive sites where the pre-pour and slab stages carry the most risk, and coastal pockets near Beachmere add a waterproofing and durability angle. Every inspector is a licensed builder, and the report lands the same day so your supervisor can act before the next trade starts.

    What we check at the slab stage

    On the cured slab, before the frame goes up, we check the finished concrete and set-out:

    Finished slab

    • Surface finish, honeycombing and cold joints
    • Edge rebates and step-downs to wet areas/garage
    • Plastic shrinkage or structural cracking

    Dimensions & penetrations

    • Overall dimensions, square and level
    • Penetration locations for plumbing and services
    • Brick overhang allowance at the slab edge (≤15mm support rule)

    Every item is photographed and referenced to the relevant Australian Standard, NCC clause or the QBCC Standards and Tolerances Guide, then delivered in a same-day digital report you can hand straight to your builder. See the full slab inspection details, or read how to choose a new-build inspector in Queensland.

    Other inspection stages across Moreton Bay

    Most owners book several stages so defects are caught before the next trade covers them. Alongside the slab inspection, we also inspect across Moreton Bay:

    Inspection pricing in Moreton Bay

    Construction stage inspection — from $550Pre-pour, slab, frame, pre-plaster (lock-up) and waterproofing inspections. Each is a focused stage check with a same-day digital report across Moreton Bay and the wider City of Moreton Bay area.
    Handover / PCI inspection — from $660Independent final inspection of new homes under 220m² before you accept the keys; larger homes are individually quoted. Our most-booked inspection.

    Slab Inspection FAQs — Moreton Bay

    What is checked at the slab stage in Moreton Bay?

    Slab dimensions, square and level, surface finish and cracking, step-downs for wet areas and garage, and the brick ledge, all before the frame is delivered.

    Should I worry about slab cracks on a filled estate?

    Fine shrinkage cracks can be minor, but on filled sites we assess the width, pattern and location and refer anything of concern to an engineer.

    Do you inspect slabs in Beachmere and the coastal pockets?

    Yes. We cover coastal Moreton Bay including Beachmere as well as the inland corridor, checking the slab before framing begins.

    Your inspector

    Your Moreton Bay inspection is carried out by a VG Inspect builder-inspector — a QBCC-licensed builder who inspects new builds full-time. Every VG Inspect inspector is a builder first and holds their own QBCC licence, and every report is checked before it's sent. You can verify any licence on the QBCC online licence search. VG Inspect holds a 5.0 rating across over 100 verified reviews and is fully insured.

    Book your Moreton Bay slab inspection

    Give us the date as early as you can — builders often give short notice. Same-day report.

    Book an Inspection
    07 3180 8041
    Call Book