Building Inspector Bray Park
64 Google Reviews
Bray Park is one of SEQ's growing new home markets. VG Inspect provides independent, QBCC-licensed building inspections across Bray Park and surrounding suburbs — so your new home is built to the standard you're paying for.
Book an InspectionFrom $660 · Same-week availability · Same-Day Reports On Site
Last updated: May 2026
Independent PCI inspection in Bray Park — from $660
A PCI (Practical Completion Inspection) is the single most important inspection you can book. It takes place before you accept the keys from your builder and is your last chance to have defects fixed at the builder's cost.
VG Inspect attends your Bray Park property, assesses every element of the completed home against Australian standards, and delivers a detailed photo-supported Same-Day Reports On Site — ready to hand directly to your builder for rectification.
New home inspections in Bray Park
Bray Park is part of the Moreton Bay corridor — one of the most active new home construction areas in South East Queensland. High construction volumes mean active construction across multiple stages, where an independent assessment helps confirm each stage meets the relevant standards.
VG Inspect attends your property, assesses every stage of construction against Australian standards, and delivers a clear photo-supported report that can be shared with your builder's site supervisor for review.
We inspect new homes built by all volume builders active in Bray Park including Metricon, Coral Homes, GJ Gardner, Nutrend Homes, Plantation Homes. Every VG Inspect inspection is carried out by a QBCC-licensed inspector — QBCC licence 1318443 — personally. No subcontractors, no shortcuts.
Inspection types available in Bray Park
Bray Park new home handover inspection checklist
- Slab level, edge beam dimensions, reinforcement cover and termite management
- Structural frame compliance — timber sizing, bracing, tie-downs and truss connections
- Roof covering, gutters, flashings, valley gutters and ridge capping
- External cladding, render, brick veneer cavity and window seals
- Internal walls, ceilings, cornice, floor coverings and door operation
- Wet area waterproofing, tiling, grout lines and silicone junctions
- Kitchen and bathroom joinery, cabinetry, fixtures and fittings
- Electrical GPOs, switches, lighting circuits and plumbing fixtures
- Driveways, paths, site drainage, fencing and landscaping requirements
- Compliance with approved plans and QBCC Standards and Tolerances
Common defects found in Bray Park new homes
Based on inspections carried out across the Moreton Bay corridor, the most common defects VG Inspect identifies include:
- Incomplete or non-compliant wet area waterproofing in showers and bathrooms
- Incorrect bracing nail patterns and missing tiedown bolts at frame stage
- Site drainage falls directing water toward the building rather than away
- Gaps and poor sealing at window and door frames
- Incomplete paintwork, plasterboard defects and cornice cracking
- Missing or incorrectly installed termite barriers
- Roof fixing deficiencies for wind classification requirements
- Incomplete or missing items from the contract specification
Why Bray Park buyers choose VG Inspect
QBCC licensed inspector
Adam holds QBCC licence 1318443 — the legal requirement to inspect and report on residential construction in Queensland. Fully insured.
New builds only
We specialise exclusively in newly constructed homes. We're familiar with the builders active in Bray Park and we know what to look for.
Same-Day Reports On Site
Your same-day PDF report with photos is issued on-site (most inspections, exclusions apply) — ready to hand directly to your builder for rectification.
Covers the full region
We cover Bray Park and all surrounding suburbs including Strathpine, Lawnton, Petrie, Brendale, Dakabin across the Moreton Bay Regional Council area.
Estates and suburbs we cover near Bray Park
VG Inspect covers all new home estates across the Bray Park area including Bray Park Estate, Strathpine. If your new home is being built in the Moreton Bay Regional Council area, we cover it.
Not sure if we cover your estate? Call us on 07 3180 8041 or book online and we'll confirm availability.
Frequently asked questions — Bray Park building inspections
How much does a building inspection cost in Bray Park?
PCI and handover inspections start from $660. Construction stage inspections are also available. There are no hidden fees — your detailed PDF report is included in the price.
Do you cover surrounding suburbs near Bray Park?
Yes — VG Inspect covers Bray Park and surrounding suburbs including Strathpine, Lawnton, Petrie, Brendale, Dakabin. If your new home is in the Moreton Bay Regional Council area, we cover it.
What is a PCI inspection in Bray Park?
A PCI (Practical Completion Inspection) is an independent building inspection carried out before you accept the keys to your new home. A QBCC-licensed inspector attends your property and assesses it against Australian standards, identifying defects your builder must fix before handover.
Which builders does VG Inspect inspect in Bray Park?
We inspect new homes built by all volume builders active in Bray Park including Metricon, Coral Homes, GJ Gardner, Nutrend Homes, Plantation Homes. VG Inspect provides an independent set of eyes during construction.
When should I book a building inspection in Bray Park?
For a PCI inspection, book as soon as your builder notifies you of practical completion — typically 2-5 days before your scheduled handover. For construction stage inspections, book at least 48 hours before each stage hold point.
My builder says they have their own quality checks. Do I still need an inspection?
Yes. An independent inspection complements your builder's internal QA. Most stage and PCI inspections identify a number of items for review — that's the inspection working as intended, and your supervisor will work with you to address them.
How long does a building inspection take in Bray Park?
A PCI or handover inspection typically takes 2-3 hours depending on the size of the home. Construction stage inspections take 45-90 minutes. Your same-day PDF report is issued on-site (most inspections, exclusions apply).
Is VG Inspect QBCC licensed?
Yes. VG Inspect holds QBCC licence 1318443 — the legal requirement to inspect and report on residential construction in Queensland. Verify this at the QBCC licence search.
Do you inspect in Bray Park?
Yes — VG Inspect covers Bray Park and all surrounding suburbs. We are based in Redcliffe and available from 6:30am across the full Moreton Bay corridor. Same-week availability. Book at vginspect.com/book.
What does a building inspection in Bray Park cost?
PCI and handover inspections in Bray Park start from $660 including GST. Construction stage inspections — slab, frame, waterproofing — are $550 per stage. Warranty inspections are $550. All prices include the detailed PDF report. No hidden fees.
Who carries out the inspection in Bray Park?
A VG Inspect QBCC-licensed inspector attends every inspection in Bray Park — QBCC licence 1318443. VG Inspect does not use subcontractors or junior inspectors. When you book, you know exactly who is walking your site.
How quickly can I get a building inspection in Bray Park?
VG Inspect offers same-week availability across Bray Park and the full Moreton Bay corridor. For urgent bookings — where your builder has notified you of a short-notice handover — call 07 3180 8041 directly for fastest response.
Book your Bray Park building inspection today
Same-week availability. QBCC licensed. Detailed Same-Day Reports On Site.
Book an Inspection5.0 ★ on Google · 64 reviews · QBCC Licensed · Every Inspection
Inspections in nearby suburbs
We cover Bray Park and surrounding areas across Moreton Bay Regional Council.
Builders we inspect in Bray Park
Independent inspections alongside these builders across Bray Park and the wider Moreton Bay Regional Council area.