Building inspector Stafford Heights
Stafford Heights is one of SEQ's growing new home markets. VG Inspect provides independent, QBCC-licensed building inspections across Stafford Heights and surrounding suburbs — so your new home is built to the standard you're paying for.
Book an inspectionFrom $660 · Same-week availability · PDF report within 24 hours
New home inspections in Stafford Heights
Stafford Heights is part of the North Brisbane corridor — one of the most active new home construction areas in South East Queensland. High construction volumes mean tight builder timelines, more subcontractors, and a higher risk of defects being overlooked before handover.
VG Inspect attends your property, assesses every stage of construction against Australian standards, and delivers a clear photo-supported report you can use to hold your builder accountable.
We inspect new homes built by all volume builders active in Stafford Heights including Metricon, Coral Homes, Plantation Homes, GJ Gardner, Orbit Homes. Every inspection is carried out by Adam Gates — QBCC licence 1318443 — personally. No subcontractors, no shortcuts.
Inspection types available in Stafford Heights
What we check at your Stafford Heights inspection
- Slab level, edge beam dimensions, reinforcement cover and termite management
- Structural frame compliance — timber sizing, bracing, tie-downs and truss connections
- Roof covering, gutters, flashings, valley gutters and ridge capping
- External cladding, render, brick veneer cavity and window seals
- Internal walls, ceilings, cornice, floor coverings and door operation
- Wet area waterproofing, tiling, grout lines and silicone junctions
- Kitchen and bathroom joinery, cabinetry, fixtures and fittings
- Electrical GPOs, switches, lighting circuits and plumbing fixtures
- Driveways, paths, site drainage, fencing and landscaping requirements
- Compliance with approved plans and QBCC Standards and Tolerances
Common defects found in Stafford Heights new homes
Based on inspections carried out across the North Brisbane corridor, the most common defects VG Inspect identifies include:
- Incomplete or non-compliant wet area waterproofing in showers and bathrooms
- Incorrect bracing nail patterns and missing tiedown bolts at frame stage
- Site drainage falls directing water toward the building rather than away
- Gaps and poor sealing at window and door frames
- Incomplete paintwork, plasterboard defects and cornice cracking
- Missing or incorrectly installed termite barriers
- Roof fixing deficiencies for wind classification requirements
- Incomplete or missing items from the contract specification
Why Stafford Heights buyers choose VG Inspect
QBCC licensed inspector
Adam holds QBCC licence 1318443 — the legal requirement to inspect and report on residential construction in Queensland. Fully insured.
New builds only
We specialise exclusively in newly constructed homes. We know the builders active in Stafford Heights and we know exactly where to look.
Report within 24 hours
Your detailed PDF report with photos is delivered within 24 hours — ready to hand directly to your builder for rectification.
Covers the full region
We cover Stafford Heights and all surrounding suburbs including Stafford, Everton Park, Mitchelton, Keperra, Aspley across the Brisbane City Council area.
Estates and suburbs we cover near Stafford Heights
VG Inspect covers all new home estates across the Stafford Heights area including Stafford Heights Estate, Mitchelton. If your new home is being built in the Brisbane City Council area, we cover it.
Not sure if we cover your estate? Call us on 0480 080 148 or book online and we'll confirm availability.
Frequently asked questions — Stafford Heights building inspections
How much does a building inspection cost in Stafford Heights?
PCI and handover inspections start from $660. Construction stage inspections are also available. There are no hidden fees — your detailed PDF report is included in the price.
Do you cover surrounding suburbs near Stafford Heights?
Yes — VG Inspect covers Stafford Heights and surrounding suburbs including Stafford, Everton Park, Mitchelton, Keperra, Aspley. If your new home is in the Brisbane City Council area, we cover it.
What is a PCI inspection in Stafford Heights?
A PCI (Practical Completion Inspection) is an independent building inspection carried out before you accept the keys to your new home. A QBCC-licensed inspector attends your property and assesses it against Australian standards, identifying defects your builder must fix before handover.
Which builders does VG Inspect inspect in Stafford Heights?
We inspect new homes built by all volume builders active in Stafford Heights including Metricon, Coral Homes, Plantation Homes, GJ Gardner, Orbit Homes. We are fully independent — we work for you, not your builder.
When should I book a building inspection in Stafford Heights?
For a PCI inspection, book as soon as your builder notifies you of practical completion — typically 2-5 days before your scheduled handover. For construction stage inspections, book at least 48 hours before each stage hold point.
My builder says they have their own quality checks. Do I still need an inspection?
Yes. Your builder's internal checks are not independent. On average VG Inspect finds 15-30 defects per new home — items the builder would not have volunteered to fix without an independent inspector present.
How long does a building inspection take in Stafford Heights?
A PCI or handover inspection typically takes 2-3 hours depending on the size of the home. Construction stage inspections take 45-90 minutes. Your PDF report is delivered within 24 hours.
Is VG Inspect QBCC licensed?
Yes. VG Inspect holds QBCC licence 1318443 — the legal requirement to inspect and report on residential construction in Queensland. Verify this at the QBCC licence search.
Book your Stafford Heights building inspection today
Same-week availability. QBCC licensed. Detailed PDF report within 24 hours.
Book now — from $6605.0 ★ on Google · 46 reviews · Adam attends every inspection