Building Inspector Sandgate
58 Google Reviews
Sandgate is one of SEQ's growing new home markets. VG Inspect provides independent, QBCC-licensed building inspections across Sandgate and surrounding suburbs — so your new home is built to the standard you're paying for.
Book an InspectionFrom $660 · Same-week availability · PDF report within 24 hours
Last updated: May 2026
Independent PCI inspection in Sandgate — from $660
A PCI (Practical Completion Inspection) is the single most important inspection you can book. It takes place before you accept the keys from your builder and is your last chance to have defects fixed at the builder's cost.
VG Inspect attends your Sandgate property, assesses every element of the completed home against Australian standards, and delivers a detailed photo-supported PDF report within 24 hours — ready to hand directly to your builder for rectification.
New home inspections in Sandgate
Sandgate is part of the North Brisbane corridor — one of the most active new home construction areas in South East Queensland. High construction volumes mean tight builder timelines, more subcontractors, and a higher risk of defects being overlooked before handover.
VG Inspect attends your property, assesses every stage of construction against Australian standards, and delivers a clear photo-supported report you can use to hold your builder accountable.
We inspect new homes built by all volume builders active in Sandgate including Metricon, Coral Homes, Plantation Homes, GJ Gardner, Stroud Homes. Every inspection is carried out by Adam Gates — QBCC licence 1318443 — personally. No subcontractors, no shortcuts.
Inspection types available in Sandgate
Sandgate new home handover inspection checklist
- Slab level, edge beam dimensions, reinforcement cover and termite management
- Structural frame compliance — timber sizing, bracing, tie-downs and truss connections
- Roof covering, gutters, flashings, valley gutters and ridge capping
- External cladding, render, brick veneer cavity and window seals
- Internal walls, ceilings, cornice, floor coverings and door operation
- Wet area waterproofing, tiling, grout lines and silicone junctions
- Kitchen and bathroom joinery, cabinetry, fixtures and fittings
- Electrical GPOs, switches, lighting circuits and plumbing fixtures
- Driveways, paths, site drainage, fencing and landscaping requirements
- Compliance with approved plans and QBCC Standards and Tolerances
Common defects found in Sandgate new homes
Based on inspections carried out across the North Brisbane corridor, the most common defects VG Inspect identifies include:
- Incomplete or non-compliant wet area waterproofing in showers and bathrooms
- Incorrect bracing nail patterns and missing tiedown bolts at frame stage
- Site drainage falls directing water toward the building rather than away
- Gaps and poor sealing at window and door frames
- Incomplete paintwork, plasterboard defects and cornice cracking
- Missing or incorrectly installed termite barriers
- Roof fixing deficiencies for wind classification requirements
- Incomplete or missing items from the contract specification
Why Sandgate buyers choose VG Inspect
QBCC licensed inspector
Adam holds QBCC licence 1318443 — the legal requirement to inspect and report on residential construction in Queensland. Fully insured.
New builds only
We specialise exclusively in newly constructed homes. We know the builders active in Sandgate and we know exactly where to look.
Report within 24 hours
Your detailed PDF report with photos is delivered within 24 hours — ready to hand directly to your builder for rectification.
Covers the full region
We cover Sandgate and all surrounding suburbs including Brighton, Shorncliffe, Deagon, Brackenridge, Boondall across the Brisbane City Council area.
Estates and suburbs we cover near Sandgate
VG Inspect covers all new home estates across the Sandgate area including Sandgate Foreshore, Brighton. If your new home is being built in the Brisbane City Council area, we cover it.
Not sure if we cover your estate? Call us on 07 3180 8041 or book online and we'll confirm availability.
Frequently asked questions — Sandgate building inspections
How much does a building inspection cost in Sandgate?
PCI and handover inspections start from $660. Construction stage inspections are also available. There are no hidden fees — your detailed PDF report is included in the price.
Do you cover surrounding suburbs near Sandgate?
Yes — VG Inspect covers Sandgate and surrounding suburbs including Brighton, Shorncliffe, Deagon, Brackenridge, Boondall. If your new home is in the Brisbane City Council area, we cover it.
What is a PCI inspection in Sandgate?
A PCI (Practical Completion Inspection) is an independent building inspection carried out before you accept the keys to your new home. A QBCC-licensed inspector attends your property and assesses it against Australian standards, identifying defects your builder must fix before handover.
Which builders does VG Inspect inspect in Sandgate?
We inspect new homes built by all volume builders active in Sandgate including Metricon, Coral Homes, Plantation Homes, GJ Gardner, Stroud Homes. We are fully independent — we work for you, not your builder.
When should I book a building inspection in Sandgate?
For a PCI inspection, book as soon as your builder notifies you of practical completion — typically 2-5 days before your scheduled handover. For construction stage inspections, book at least 48 hours before each stage hold point.
My builder says they have their own quality checks. Do I still need an inspection?
Yes. Your builder's internal checks are not independent. On average VG Inspect finds 15-30 defects per new home — items the builder would not have volunteered to fix without an independent inspector present.
How long does a building inspection take in Sandgate?
A PCI or handover inspection typically takes 2-3 hours depending on the size of the home. Construction stage inspections take 45-90 minutes. Your PDF report is delivered within 24 hours.
Is VG Inspect QBCC licensed?
Yes. VG Inspect holds QBCC licence 1318443 — the legal requirement to inspect and report on residential construction in Queensland. Verify this at the QBCC licence search.
Do you inspect in Sandgate?
Yes — VG Inspect covers Sandgate and all surrounding suburbs. We are based in Redcliffe and available from 6:30am across the full North Brisbane corridor. Same-week availability. Book at vginspect.com/book.
What does a building inspection in Sandgate cost?
PCI and handover inspections in Sandgate start from $660 including GST. Construction stage inspections — slab, frame, waterproofing — are $550 per stage. Warranty inspections are $550. All prices include the detailed PDF report. No hidden fees.
Who carries out the inspection in Sandgate?
Adam Gates personally attends every inspection in Sandgate — QBCC licence 1318443. VG Inspect does not use subcontractors or junior inspectors. When you book, you know exactly who is walking your site.
How quickly can I get a building inspection in Sandgate?
VG Inspect offers same-week availability across Sandgate and the full North Brisbane corridor. For urgent bookings — where your builder has notified you of a short-notice handover — call 07 3180 8041 directly for fastest response.
Book your Sandgate building inspection today
Same-week availability. QBCC licensed. Detailed PDF report within 24 hours.
Book an Inspection5.0 ★ on Google · 58 reviews · Adam attends every inspection