Building Inspector Upper Caboolture
58 Google Reviews
Upper Caboolture is one of SEQ's growing new home markets. VG Inspect provides independent, QBCC-licensed building inspections across Upper Caboolture and surrounding suburbs — so your new home is built to the standard you're paying for.
Book an InspectionFrom $660 · Same-week availability · PDF report within 24 hours
Last updated: May 2026
Independent PCI inspection in Upper Caboolture — from $660
A PCI (Practical Completion Inspection) is the single most important inspection you can book. It takes place before you accept the keys from your builder and is your last chance to have defects fixed at the builder's cost.
VG Inspect attends your Upper Caboolture property, assesses every element of the completed home against Australian standards, and delivers a detailed photo-supported PDF report within 24 hours — ready to hand directly to your builder for rectification.
New home inspections in Upper Caboolture
Upper Caboolture is part of the Moreton Bay corridor — one of the most active new home construction areas in South East Queensland. High construction volumes mean active construction across multiple stages, where an independent assessment helps confirm each stage meets the relevant standards.
VG Inspect attends your property, assesses every stage of construction against Australian standards, and delivers a clear photo-supported report that can be shared with your builder's site supervisor for review.
We inspect new homes built by all volume builders active in Upper Caboolture including Metricon, Coral Homes, Brighton Homes, GJ Gardner, Hallmark Homes. Every VG Inspect inspection is carried out by a QBCC-licensed inspector — QBCC licence 1318443 — personally. No subcontractors, no shortcuts.
Inspection types available in Upper Caboolture
Upper Caboolture new home handover inspection checklist
- Slab level, edge beam dimensions, reinforcement cover and termite management
- Structural frame compliance — timber sizing, bracing, tie-downs and truss connections
- Roof covering, gutters, flashings, valley gutters and ridge capping
- External cladding, render, brick veneer cavity and window seals
- Internal walls, ceilings, cornice, floor coverings and door operation
- Wet area waterproofing, tiling, grout lines and silicone junctions
- Kitchen and bathroom joinery, cabinetry, fixtures and fittings
- Electrical GPOs, switches, lighting circuits and plumbing fixtures
- Driveways, paths, site drainage, fencing and landscaping requirements
- Compliance with approved plans and QBCC Standards and Tolerances
Common defects found in Upper Caboolture new homes
Based on inspections carried out across the Moreton Bay corridor, the most common defects VG Inspect identifies include:
- Incomplete or non-compliant wet area waterproofing in showers and bathrooms
- Incorrect bracing nail patterns and missing tiedown bolts at frame stage
- Site drainage falls directing water toward the building rather than away
- Gaps and poor sealing at window and door frames
- Incomplete paintwork, plasterboard defects and cornice cracking
- Missing or incorrectly installed termite barriers
- Roof fixing deficiencies for wind classification requirements
- Incomplete or missing items from the contract specification
Why Upper Caboolture new home buyers choose VG Inspect
QBCC licensed inspector
Adam holds QBCC licence 1318443 — the legal requirement to inspect and report on residential construction in Queensland. Fully insured.
New builds only
We specialise exclusively in newly constructed homes. We're familiar with the builders active in Upper Caboolture and we know what to look for.
Report within 24 hours
Your detailed PDF report with photos is delivered within 24 hours — ready to hand directly to your builder for rectification.
Covers the full region
We cover Upper Caboolture and all surrounding suburbs including Caboolture, Morayfield, Wamuran, Elimbah, Bellmere across the Moreton Bay Regional Council area.
"Adam found waterproofing defects in our shower and a drainage issue at the back of our slab. The builder fixed everything before we signed. Worth every cent."
— Jarrod M, Upper CabooltureEstates and suburbs we cover near Upper Caboolture
VG Inspect covers all new home estates across the Upper Caboolture area including Waraba, Caboolture West, Merryvale. If your new home is being built in the Moreton Bay Regional Council area, we cover it.
Not sure if we cover your estate? Call us on 07 3180 8041 or book online and we'll confirm availability.
Frequently asked questions — Upper Caboolture building inspections
How much does a building inspection cost in Upper Caboolture?
PCI and handover inspections start from $660. Construction stage inspections are also available. There are no hidden fees — your detailed PDF report is included in the price.
Do you cover surrounding suburbs near Upper Caboolture?
Yes — VG Inspect covers Upper Caboolture and surrounding suburbs including Caboolture, Morayfield, Wamuran, Elimbah, Bellmere. If your new home is in the Moreton Bay Regional Council area, we cover it.
What is a PCI inspection in Upper Caboolture?
A PCI (Practical Completion Inspection) is an independent building inspection carried out before you accept the keys to your new home. A QBCC-licensed inspector attends your property and assesses it against Australian standards, identifying defects your builder must fix before handover.
Which builders does VG Inspect inspect in Upper Caboolture?
We inspect new homes built by all volume builders active in Upper Caboolture including Metricon, Coral Homes, Brighton Homes, GJ Gardner, Hallmark Homes. VG Inspect provides an independent set of eyes during construction.
When should I book a building inspection in Upper Caboolture?
For a PCI inspection, book as soon as your builder notifies you of practical completion — typically 2-5 days before your scheduled handover. For construction stage inspections, book at least 48 hours before each stage hold point.
My builder says they have their own quality checks. Do I still need an inspection?
Yes. An independent inspection complements your builder's internal QA. Most stage and PCI inspections identify a number of items for review — that's the inspection working as intended, and your supervisor will work with you to address them.
How long does a building inspection take in Upper Caboolture?
A PCI or handover inspection typically takes 2-3 hours depending on the size of the home. Construction stage inspections take 45-90 minutes. Your PDF report is delivered within 24 hours.
Is VG Inspect QBCC licensed?
Yes. VG Inspect holds QBCC licence 1318443 — the legal requirement to inspect and report on residential construction in Queensland. Verify this at the QBCC licence search.
Do you inspect in Upper Caboolture?
Yes — VG Inspect covers Upper Caboolture and all surrounding suburbs. We are based in Redcliffe and available from 6:30am across the full Moreton Bay corridor. Same-week availability. Book at vginspect.com/book.
What does a building inspection in Upper Caboolture cost?
PCI and handover inspections in Upper Caboolture start from $660 including GST. Construction stage inspections — slab, frame, waterproofing — are $550 per stage. Warranty inspections are $550. All prices include the detailed PDF report. No hidden fees.
Who carries out the inspection in Upper Caboolture?
A VG Inspect QBCC-licensed inspector attends every inspection in Upper Caboolture — QBCC licence 1318443. VG Inspect does not use subcontractors or junior inspectors. When you book, you know exactly who is walking your site.
How quickly can I get a building inspection in Upper Caboolture?
VG Inspect offers same-week availability across Upper Caboolture and the full Moreton Bay corridor. For urgent bookings — where your builder has notified you of a short-notice handover — call 07 3180 8041 directly for fastest response.
Book your Upper Caboolture building inspection today
Same-week availability. QBCC licensed. Detailed PDF report within 24 hours.
Book an Inspection5.0 ★ on Google · 58 reviews · QBCC Licensed · Every Inspection